In scrap recycling and structural demolition, high-efficiency attachments are key to boosting job site productivity. YG Series excavator hydraulic shears combine massive jaw power with rapid cycle times to handle tough steel cutting with ease. As a direct manufacturer, YG Machinery produces each unit at our Zhengzhou facility and conducts thorough pressure testing before dispatch, ensuring dependable power for 5- to 50-ton carriers.
YG Excavator Hydraulic Shear: 5 Models for 5-50 Ton Excavators
The YG-620 is the smallest model. It weighs 620kg and fits 5-9 ton excavators. The YG-4052 is the largest. It weighs 4,052kg and fits 38-50 ton machines. A rotating hydraulic shear allows the operator to position the jaw at any angle. The table below shows all five models.
| Item | YG-620 | YG-1413 | YG-2200 | YG-2977 | YG-4052 |
|---|---|---|---|---|---|
| Weight (kg) | 620 | 1413 | 2200 | 2977 | 4052 |
| Max. Open Size (mm) | 334.4 | 540 | 500 | 660 | 801 |
| Width (mm) | 864 | 1175 | 1370 | 1600 | 1700 |
| Height (mm) | 1521 | 2050 | 2380 | 2600 | 2700 |
| Effective Shear Depth (mm) | 286 | 348 | 486 | 578 | 736 |
| Rotating Way | 360° collision | 360° hydraulic | 360° hydraulic | 360° hydraulic | 360° hydraulic |
| Working Pressure (Bar) | 235 | 300 | 320 | 320 | 320 |
| Bottom Shear Force (T) | 81.2 | 138.2 | 171.2 | 330.2 | 387.2 |
| Medium Shear Force (T) | 50.2 | 80.2 | 100.2 | 189.2 | 218.2 |
| Tip Shear Force (T) | 32.2 | 53.2 | 75.2 | 127.2 | 147.2 |
| Applied Excavator Weight (T) | 5-9 | 10-19 | 20-25 | 28-35 | 38-50 |
Compare Models and Get a Quote
Demolition Shears: Technical Specifications
The table above lists specifications for each model. These numbers help buyers compare a hydraulic shear for sale from different suppliers. Check the bottom shear force and effective shear depth. The YG-2977 offers 330.2 tons of bottom force and 578mm shear depth. The YG-4052 offers 387.2 tons and 736mm depth. Working pressure ranges from 235 to 320 bar. All models use 360° rotation. The YG-620 fits 5-9 ton excavators. The YG-4052 fits 38-50 ton machines. Choose the model that matches your carrier and material.
Three force ratings appear in the table: bottom, medium, and tip. The bottom shear force is the maximum power at the deepest point of the jaw. This number matters for cutting thick steel beams. The YG-4052 delivers 387.2 tons at the bottom. The medium shear force applies at the middle of the jaw. The tip shear force is the force at the jaw opening. Tip force matters for grabbing and starting cuts. A higher tip force helps with thin, hard material. Effective shear depth tells you the maximum thickness the jaw can cut in one pass. The YG-4052 handles 736mm. The YG-620 handles 286mm. Working pressure tells you the hydraulic demand. Higher pressure requires a stronger carrier hydraulic system. Check your excavator’s auxiliary circuit before ordering. The max open size determines what fits in the jaw. The YG-4052 opens to 801mm. That handles large structural sections. Match the model to your excavator weight and typical material thickness.
Applications: Where These Shears Work Best
These shears work in many demolition and recycling applications.
- Scrap yards. Cut rebar, pipes, and steel frames into manageable sizes. The YG-2200 handles 20-25 ton excavators.
- Bridge demolition. Remove steel reinforcement from concrete structures. The YG-2977 provides 330.2 tons of force.
- Building demolition. Process structural steel and metal framing. The 360° rotation reaches tight corners.
- Concrete recycling. Separate rebar from crushed concrete. The YG-1413 fits 10-19 ton carriers.
- Industrial dismantling. Cut tanks, vessels, and machinery. The YG-4052 handles the largest jobs.
- Emergency response. Clear collapsed structures after disasters. The compact YG-620 fits small excavators.
Start Your Project with the Right Equipment
Demolition Shears in Action
Rotating Hydraulic Shear: 360° Rotation for Scrap Rebar
A rotating hydraulic shear cuts scrap rebar and steel structures from any angle. The 360° rotation lets the operator position the jaw without moving the excavator. This saves time on demolition sites. An excavator hydraulic shear with this feature reduces repositioning by up to 40%. The hydraulic rotation system provides smooth, controlled movement. The YG-2200 and larger models use this system. The YG-620 uses a collision-type rotation. Both designs deliver full 360° coverage.
The hydraulic rotation system uses a dedicated motor and gear ring. It turns the jaw continuously in either direction. The operator controls rotation from the cab with a foot pedal or joystick button. Response time is under one second. This precision matters when cutting tangled rebar bundles. The operator can rotate the jaw to match the bundle angle without repositioning the excavator. On a typical scrap yard shift, this saves 30-45 minutes of repositioning time. The hydraulic system also holds the jaw at any angle under load. It does not drift or slip during cutting. The collision-type rotation on the YG-620 uses mechanical stops. It is simpler and lighter. It suits smaller carriers where weight matters. Both systems deliver full 360° coverage. Maintenance is minimal. Grease the rotation bearing every 50 hours. Check hydraulic hoses for wear. The system adds about 10% to the attachment weight. That is a fair trade for the productivity gain.
Find the Right Model for Your Project
Hydraulic Shear for Sale: What Affects the Price
The price of a hydraulic shear for sale depends on several factors. Size and shear force are the main drivers. Larger models cost more because they use more steel and bigger cylinders. The YG-4052 delivers 387.2 tons of bottom shear force. The YG-620 delivers 81.2 tons. Working pressure also affects cost. Higher pressure requires stronger components. The rotating system adds cost. Hydraulic rotation costs more than collision rotation. Production volume and shipping also influence the final price.
Several other factors shape the final number. The type of steel used in the frame matters. High-strength steel costs more but lasts longer. The cylinder seals and bearings also affect price. Imported seals cost more but resist wear better. The rotation system is a major cost driver. Hydraulic rotation adds $2,000-$4,000 over collision rotation. The hydraulic motor and gear ring are the reason. The control system adds cost too. A proportional joystick control lets the operator feather the jaw speed. That is a premium feature. Shipping and import duties vary by destination. A unit shipped to the US from China adds 5-10% in freight and tariffs. Volume discounts apply for orders of three or more units. YG Machinery sells factory-direct. There is no dealer markup. That saves buyers 15-20% compared to buying through a distributor. Spare parts and warranty terms also affect the total cost of ownership. Ask for a quote that includes a spare seal kit and a spare shear blade.
A Real-World Case: Texas Scrap Yard Cuts Processing Time by 50%
A scrap metal recycling company in Houston, Texas, purchased a YG-2200 rotating hydraulic shear in early 2025. They process 800 tons of scrap rebar and structural steel every month. Their previous method used a competitor’s shear with fixed rotation. Operators had to reposition the excavator every time the jaw angle was wrong. This wasted 15-20 minutes per hour. Rebar bundles often jammed because the fixed jaw could not reach the right angle. The company lost $3,000 per month in wasted labor hours.
The YG-2200 arrived with the 360° hydraulic rotation system and a complete seal kit. The crew trained for one day on the rotation controls and shear operation. The 320 bar working pressure and 171.2-ton bottom shear force cut through rebar bundles in a single pass. The 486mm effective shear depth handled the thickest bundles without double-cutting.
In the first month, processing time dropped from 12 hours to 6 hours per 100-ton batch. The 360° rotation eliminated the repositioning delays. The hydraulic rotation system adjusted the jaw angle from the cab in seconds. Rebar jams dropped by 90% because the operator could approach each bundle from the ideal angle. The company processed 1,600 tons in the first month instead of 800 tons.
The fuel savings alone reached $1,800 per month. The shear paid for itself in four months. The owner purchased a second YG-2200 for their Dallas yard in June 2025. He reported that both units have run 2,000 hours with zero hydraulic failures. The company now bids on larger demolition contracts because they can guarantee faster processing times.
Ready to Choose Your Demolition Shears?
We offer free consultation and model selection. Tell us your excavator size and material type. We will recommend the right shear and provide a detailed quote within 8 hours.
Three ways to move forward:
- Request a quote – Send your excavator specifications. Get pricing fast.
- Watch a test run – Ask for a video of the shear cutting your material.
- Visit our factory – See production and meet our engineers in Zhengzhou.
Contact us today via WhatsApp, email, or the website form. Every machine includes a 2-year warranty and lifetime remote support.
